Introduction to the safe operation rules of milling machine technology

1. Before operation, check whether the handles of each part of the milling machine are normal, add lubricating oil according to the regulations, and run at low speed for 1 to 2 minutes before operation. 2. Wear work clothes before work. Female workers must wear work caps.

2021-10-20 17:42:07

查看更多

Selection principle of CNC lathe

The basic principle for determining the three elements is: according to the cutting requirements, first determine the post feed amount, then look up the table to get the feed amount, and then look up the table to calculate the main cutting speed through the formula.In many cases, we can use em

2021-10-20 17:41:42

查看更多

How to choose a double-spindle CNC lathe correctly?

1. Select the preparation work of the dual-spindle CNC latheTo determine the process requirements of typical parts, the batch of processed workpieces, and the functions of CNC lathes should be prepared in the early stage. The premise of reasonable selection of CNC lathes is to meet the process requi

2021-10-20 17:41:27

查看更多

How to reduce the problems of CNC vertical lathes

No matter what kind of machine is used, problems will inevitably occur after long-term use.So, how to extend the life of the turning-milling composite CNC lathe parts and the wear life of the corresponding parts, prevent accidents and other problems, and make the life of the small CNC vertical

2021-10-20 17:40:23

查看更多

Analysis of Thread Damage Problem of Numerical Control Lathe

A CNC vertical lathe is also called a vertical CNC lathe. Its main shaft is perpendicular to the horizontal plane. It is a large-diameter circular table used to clamp the workpiece.This machine tool is mainly used to process large and complex parts with large radial dimensions and relatively s

2021-10-20 17:39:28

查看更多